Procedure
1. Tap the Main menu.
2. Select Unlock main safety cover to access the work zone.
7.3 The specimen holder
7.3.1 Place and remove the specimen holder
CRUSHING HAZARD
Take care of your fingers when handling the machine.
Always wear safety shoes when handling specimen holders, as they can be heavy.
CAUTION
Wear suitable gloves to protect fingers from abrasives and warm/sharp specimens.
Note
With a 300 mm (11.8") MD-Disc size, you can use the 160 mm (6.3") specimen
holders.
With a 250 mm (9.8") MD-Disc size, you can use the 140 mm (5.5") specimen
holders.
The vertical conveyor drawers have three different positions. Each position indicates a certain state
on the machine:
• Open: The drawer is ready to be used.
• Partially open: The specimen holder is ready for inspection, or the drawer is empty.
• Closed: The machine is processing the specimen holder you placed in this position or the
holder is in queue.
52 Xmatic
7 Operate the device
To Next Page