Struers Xmatic - 8.1.3 Configure the MD grinding surface

4. Select Manual.
Settings
Dressingamount
To obtain an active and plane grinding stone surface, make sure that the dresser steps are
large enough to adequately dress the grinding stone.
To obtain the longest possible lifetime of the grinding stone, make sure that the dresser steps
are as small as possible.
• Set the dresser step from 20 to 100 μm, in intervals of 10 μm.
Dresser mode
• Set the rotation time from 1 to 9 minutes, in steps of 1 min.
For operation, see Manual dressing of the grinding stone ►70.
8.1.3 Configure the MD grinding surface
1. Log in to the machine as an Administrator.
2. From the Main menu, select Configuration.
8 Configuration
Xmatic 79