Struers Xmatic - 7.5.8 Pause the ongoing process

2. Select Unlock MD safety cover.
Exceptions
You cannot open the MD elevator door:
• while the machine is reading the MD surfaces
• when the machine is either delivering or retrieving an MD surface
• when the machine is in fact processing on the MD station.
7.5.8 Pause the ongoing process
During the preparation, you may discover that you need to pause the process. You can then
pause the ongoing process on the display.
1. Tab on the Pause icon.
2. Complete the action you wish to perform.
7 Operate the device
Xmatic 71