1 About this manual
CAUTION
Struers equipment must only be used in connection with and as described in the
Instruction Manual supplied with the equipment.
Note
Read the Instruction Manual carefully before use.
Note
If you want to view specific information in detail, see the online version of this
manual.
1.1 Accessories and consumables
Accessories
For information about the available range, see the Xmatic accessories overview on the Struers
website (http://www.struers.com).
Consumables
The machine is designed to be used only with Struers consumables specifically designed for this
purpose and this type of machine.
Other products may contain aggressive solvents, which dissolve e.g. rubber seals. The warranty
may not cover damaged machine parts (e.g. seals and tubes), where the damage can be directly
related to the use of consumables not supplied by Struers.
For information about the available range, see: The Struers Website (http://www.struers.com).
2 Safety
2.1 Intended use
Xmatic is intended for professional automatic materialographic grinding, polishing and cleaning of
materials for further materialographic preparation. The machine is only to be operated by
skilled/trained personnel. The machine is designed to be used with Struers consumables
specially designed for this purpose and this type of machine.
The machine is for use in a professional working environment (e.g. a materialographic
laboratory).
1 About this manual
Xmatic 7
To Next Page