Stryker 1000 - Page 71

67
1500–44–5 29” Crank Fowler/Crank Gatch Litter Ass’y
Item Part No. Part Name Qty.
A 1500–44–4 Litter Frame Ass’y1
B 940–1–11 Crossbar 2
C 389–34–20 Position Bracket Ass’y, Left 1
D 389–34–8 Stationary Skin 1
E 378–24–15 Pivot Plate Assembly 4
F 389–34–14 Head End Fowler 1
H 393–29–4 Head End Top 1
J 940–2–10 Crossbar Mount 4
N 378–24–23 Roller 4
P 378–24–22 Riser Bar 2
R 940–2–134 Hinge Bracket, Machined 6
S 389–34–15 Knee Gatch Center 1
T 389–34–12 Knee Gatch Center Skin 1
W 389–32–24 Center Riser Bar 2
Y 389–34–6 Hinge 1
Z 389–34–16 Knee Gatch Foot End 1
AA 389–34–11 Knee Gatch Foot End Skin 1
AB 389–34–17 Foot End Fowler Lock Ass’y1
AE 389–34–18 Adaptor 1
AF 389–32–17 Connecting Rod 1
AH 389–32–16 Screw Coupler 1
AJ 935–34–5 Threaded Shaft 1
AK 378–24–9 Collar 2
AL 81–148 Thrust Bearing 2
AM 81–149 Thrust Washer 4
AN 26–43 Roll Pin 9
AP 389–34–19 Long Adaptor 1
AS 935–34–6 Knee Gatch Threaded Shaft 1
AT 1500–245–25 Handle Assembly 2
AW 378–24–30 Knob 2
AZ 378–24–29 Shoulder Bolt 2
BA 26–56 Roll Pin 2
BB 378–24–42 Formed Washer 2
BC 11–73 Washer 1
BD 393–53–20 Strap Anchor 4
BF 16–6 Kep Nut 2
BH 26–57 Roll Pin 6
BJ 25–55 Rivet 62
BK 25–56 Rivet 10
BL 25–17 Rivet 4
BM 14–4 Washer 8
BN 11–53 Washer 4
BP 28–28 Retaining Ring 4
BR 389–32–30 Right Hand Nut 1
BS 8–13 Hex Hd. Shoulder Bolt 6
BT 1–34 Flat Hd. Mach. Screw 4
BW 7–4 Truss Hd. Mach. Screw 4
BZ 378–24–8 Left Hand Nut 1
CB 389–34–21 Position Bracket Ass’y, Right 1
CC 378–24–46 Collar 4
CE 935–34–25 Crossbar, Head End 1
CF 935–34–26 Crossbar, Foot End 1
CH 25–79 Pop Rivet 8
CJ 7900–1–102 Velcro Pile 1
CK 25–40 Pop Rivet 4