19
4.6 FUSE REPLACEMENT
4.6.1 Rear Panel Fuse Replacement
Tool s R equired:
Basic Tool Kit
• Remove power cord.
• Locate the fuse holder below the power cord inlet (see
Figure 1).
• Release the fuse holder clamps with a flat head screw
driver and remove the fuse holder with 2 attached fuses.
• Wipe the metallic ends of the new fuse(s) with a clean
tissue to remove any residue from fingers..
• Remove the old fuse(s) and install a new 5a fuse in the
fuse holder.
• Replace the fuse holder with 2 attached fuses.
• Reattach the fuse holder clamps.
To Next Page
Loading...
Need help?
General
