Performing Software Updates
Software updates provide enhancements to the system such as new features, added
security, and upgraded functions.
To check for updates, you first need to connect to a Wi-Fi network.
1. Connect to a Wi-Fi network or start the aha application on your smartphone.
2. Next, display the general setting screen. Then select “Check for Updates”. If an update
is available, select “Download Now” to begin the download.
3. Once the download is finished, select the “Install Now” button to start the installation.
After the installation is complete, select “I Agree” on the confirmation message to
complete the update processing. The system will restart automatically.
NOTE: System functionality will be restricted during installation.
For detailed step-by-step instructions and more information, please refer to page 111
or your STARLINK
®
Owner’s Manual.
SOUND
To change the sound settings, press the “Home” button, then select “Settings”, and then
select “Sound”. Choose the setting you want to change.
SETTING FUNCTION
EQ and Sound Position Select to set sound settings.
Surround Select to turn the surround on/off.
Entertainment Volume Select to set audio volume.
Aux Volume Gain Select to set AUX volume gain.
Microphone Volume Select to adjust the mic sensitivity. This adjusts the
speaker’s voice during hands-free communication.
Navigation Volume Select to set the navigation prompt volume.
(Navigation-equipped vehicles only).
Phone Volume Select to adjust the default volume of the other party’s
voice.
Ringtone Volume Select to adjust the ringtone volume.
Speech/VR Volume Select to set the voice recognition prompts volume.
Alert Sounds Select to turn the Alert Sound on/off for traffic,
weather, or SXM game information updates.
Beep Sounds Select to turn the sound beeps on/off.
Speed Volume
Select to set the speed volume. The system adjusts to the
optimum volume and tone quality according to vehicle
speed to compensate for increased vehicle noise.
SETTINGS AND UPDATES
79
To Next Page
Loading...
