Subaru Impreza 2021 - Lane Departure Warning and Pre-Collision Braking System off Switches

Customizing EyeSight
®
Settings
The EyeSight
®
system features customization of certain preferences
and warnings. Use the steering wheel mounted “i/Set” and arrow
switches to navigate through the Combination Meter Display (CMD)
to adjust settings such as:
• Warning Volume: Min/Mid/Max
• Cruise Control Acceleration Characteristics: Eco/Comfort/
Standard/Dynamic
LANE DEPARTURE WARNING AND
PRE-COLLISION BRAKING SYSTEM OFF SWITCHES
Lane Departure Warning OFF Switch
Press and hold this switch on the overhead console
for two seconds to turn off the Lane Departure
Warning and Lane Sway Warning functions. Press and
hold the switch again for two seconds to turn the
functions on.
When these functions are off, a yellow Lane Departure Warning OFF indicator will be
illuminated in the Combination Meter. It may be helpful to turn these functions off when
lane markings on the road are inconsistent.
Pre-Collision Braking OFF Switch
Press and hold this switch on the overhead console
for two seconds to turn off the Pre-Collision Braking,
Pre-Collision Brake Assist, and Pre-Collision Throttle
Management functions. Press and hold the switch
again for two seconds to turn the functions on.
When these functions are off, a yellow Pre-Collision Braking OFF indicator illuminates in
the Combination Meter Display. It may be helpful to turn these functions off when using a
drive-through carwash.
i/Set and Arrow
Switches
EYESIGHT
91