REVERSE AUTOMATIC BRAKING (RAB) (if equipped)
This system uses four rear bumper mounted sonar
sensors to detect objects when moving between
1 and 9 mph in reverse. RAB uses the Rear-Vision
Camera image to display colored proximity alerts
when an object is detected. As an object becomes
closer to the rear of your vehicle, audible beeps
provide additional awareness in three progressive
levels. If RAB determines that a collision with an
object is possible, the system can automatically apply
the brakes to help prevent or minimize the impact.
The default operation of the RAB system is on, but in some cases, such as connecting a
trailer, it may be helpful to temporarily turn the system off. RAB can be turned off using the
Touchscreen buttons on the lower corners when the select lever is in the “R” position.
All functions will automatically return to ON the next time the select lever is shifted to the
“R” position.
Touch and hold the “RAB ON” button in the lower left of the Touchscreen until
it changes to “RAB OFF” to disable the automatic braking functions of the
RAB system.
Touch and hold the “P))) ON” button in the lower left of the Touchscreen until
it changes to “P))) OFF” to disable the audible beeping of the RAB system.
DRIVER ASSIST TECHNOLOGIES
94
To Next Page
Loading...
