Black plate (180,1)
北米Model "A2480BE-A" EDITED: 2011/ 7/ 26
4-6 Climate control
and become damaged, the system may
not be able to control the interior tempera-
ture correctly. To avoid dam aging the
sensors, observe the following precau-
tions:
– Do not subject the sensors to impact.
– Keep water away from the sensors.
– Do not cover the sensors.
The sensors are located as follows:
– Solar sensor: beside the speaker grille
on the dashboard
– Interior air temperature sensor: on the
side of the driver-side part of the center
panel
– Outside temperatur e sensor: behind
front grille.
Manual climate control
& Airflow mode selection
Select the preferred airflow mode by
performing the following procedure.
. Press the preferred airflow control
button (type A)
. Press the airflow mode selection button
or defroster button (type B)
Airflow modes are as follows.
(Ventilation): Instrument panel outlets
(Bi-level): Instrument panel outlets and the
foot outlets
(Heat): Foot outlets, both side outlets of
the instrument panel and some through
windshield defroster outlets (A small
amount of air flows to the windshield and