EasyManua.ls Logo

Subaru Outback 2012 - Recommended Tire Inflation Pressure

Subaru Outback 2012
474 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (458,1)
Model "A2480BE-A" EDITED: 2011/ 7/ 26
13-4 Consumer information and Reporting safety defects
! Maximum load rating
The load rating at the maximum
permissible weight load for this tire.
For example, MAX. LOAD 615 kg
(1,356 LBS) @ 350 kPa (51 PSI)
MAX. PRESS.
WARNING
Maximum load rating applies
only to the tire, not to the
vehicle. Putting a load rated
tire on any vehicle does not
mean the vehicle can be
loaded up to the tires rated
load.
! Construction typ e
Applicable construction of this tire.
For example, TUBELESS STEEL
BELTED RADIAL
! Construction
The generic name of each cord
material used in the plies (both
sidewall and tread area) of this tire.
For example, PLIES: TREAD 2
STEEL + 2 POLYESTER + 1
NYLON SIDEWALL 2 POLYE-
STER
! Uniform Tire Quality Grading
(UTQG)
For details, refer to Uniform tire
quality grading standards F13-14
.
& Recommended tire inflation
pressure
! Recommended cold tire infla-
tion pressure
For the recommended cold tire
inflation pressure for your vehicles
tires, refer to Tires F12-9
.
! Vehicle placard
The vehicle placard is affixed to the
drivers side B-pillar.
Example:

Table of Contents

Related product manuals