EasyManua.ls Logo

Subaru Outback 2012 - Door locks

Subaru Outback 2012
474 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (94,1)
Model "A2480BE-A" EDITED: 2011/ 7/ 26
2-4 Keys and doors
The security ID is also needed for
replacement or repair of the engine control
unit, integrated unit, etc. For details,
consult your SUBARU dealer.
& Security indicator light
Refer to Security indicator light F3-21.
& Key replacement
Your key number plate and security ID
plate will be required if you ever need a
replacement key made. Any new key must
be registered for use with your vehicles
immobilizer system before it can be used.
Up to four keys can be registered for use
with one vehicle.
For security, all the keys registered with
your vehicles immobilizer system will
have thei r ID codes erased and re-
reg istered when a new key is made.
Therefore, all of your vehicles keys must
be presented when a new key is regis-
tered. Any key that is not re-registered
when a new key is made cannot be used
after the other keys are re-registered. For
information on replacement keys and on
the registration of keys with your immo-
bilizer system, contact your SUBARU
dealer.
Door locks
& Locking and unlocking from
the outside
To lock the drivers door from the outside
with the key, turn the key toward the rear.
To unlock the door, turn the key toward the
front.
Pull the outside door handle to open an
unlocked door.
Locking without the key
1) Rotate the lock lever rearward.
2) Close the door.
To lock the door from the outside without
the key, rotate the lock lever rearward and
then close the door.

Table of Contents

Related product manuals