Black plate (388,1)
北米Model "A2480BE-A" EDITED: 2011/ 7/ 26
11-8 Maintenance and service
3. Release the secondary hood release
by moving the lever between the front
grille and the hood toward the left.
4. Lift up the hood.
To close the hood:
1. Lower the hood to a height of approxi-
mately 5.9 in (15 cm) above its closed
position and then let it drop.
2. After closing the hood, be sure the
hood is securely locked.
If this does not close the hood, release it
from a slightly higher position. Do not push
the hood forcibly to close it . It could
deform the metal.
WARNING
Always ch eck that the hood is
properly locked before you start
driving. If it is not, it might fly open
while t he vehicle is moving and
block your view, which may cause
an accident and serious bodily in-
jury.
To Next Page
Loading...
