Black plate (143,1)
一般Model "A2510GE-B" EDITED: 2015/ 6/ 25
! Operation by the button on the
instrument panel
Power rear gate button
To open the rear gate:
Press and hold the power rear gate button
when the rear gate is closed. Then the
hazard warning flashers will flash twice.
The rear gate will open automatically.
To stop the rear gate midway:
Briefly press the power rear gate button
while the rear gate is being opened. Then
the hazard warning flashers w ill flash
twice. If the button is pressed and held
again, the rear gate will close. If the button
is briefly pressed while the gate is closed,
the rear gate can be opened.
To close the rear gate:
Press and hold the power rear gate
button. Then the hazard warning flashers
will flash twice. If the button is briefly
pressed again, the rear gate will open.
NOTE
If the rear gate cannot be opened/
closed by performing the operation
described above, a sh ort electronic
chirp will sound three times.
! Operation by the button on the
access key/transmitter
Powerreargatebutton (models with
access key)
Power rear gate button (models with
transmitter)
To open the rear gate:
Press and hold the power rear gate button
when the rear gate is closed. Then the
hazard warning flashers will flash four
times. The rear gate will open automati-
cally.
To stop the rear gate midway:
Briefly press the power rear gate button
while the rear gate is being opened. Then
the hazard warning flashers w ill flash
twice. If the button is pressed again, the
rear gate will close. If the button is briefly
pressed while the gate is closed, the rear
gate can be opened.
Keys and doors/Rear gate (Outback)
2-35
– CONTINUED –
2
To Next Page
Loading...
