Black plate (201,1)
一般Model "A2510GE-B" EDITED: 2015/ 6/ 25
NOTE
For models with a turn signal lever
equipped on the rig ht sid e of the
steering wheel, the pushing direction
of the turn signal lever is the opposite
of that described here.
& One-touch lane changer
To flash the turn signal and turn signal
indicator light three times, push the turn
signal lever up or down sl ightly and
immediately release it.
The operational/non-operational setting of
the one-touch lane change r’s can be
changed by a SUBARU dealer. We
recommend that you contact the nearest
SUBARU dealer for details.
Illumination brightness con-
trol
The illumination brightness of the clock
display, audio, air conditioner, multi func-
tion display and meter/gauge dims under
the following conditions.
. when the light switch is in the “
” or
“
” position (except Australia models)
. when the light switch is in the “
” or
“
” position (Australia models)
. when the light switch is in the “AUTO”
position and the headlights illuminate
automatically (models with auto on/off
headlights)
You can adjust the illumination brightness
for better visibility.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
NOTE
. When the control dial is turned fully
upward, the il luminati on brightne ss
becomes the maximum and the auto-
matic dimming function does not work
at all.
. The brightness setting is not can-
celed even when the ignition switch is
turned to the “LOCK”/“OFF” position.
& Auto dimmer cancel function
When the ambient light is bright, the
illumination brightness is set to the max-
imum regardless of the position of the
control dial. In this case, you cannot adjust
the illumination brightness by using the
control dial. When the ambient light is
dark, you can dim the illumination bright-
ness as described above.
The operational/non-operational settin g
and sensitivity of the auto dimmer cancel
function can be changed by your
SUBARU dealer. We recommend that
you contact your SUBARU dealer for
details.
Instruments and controls/Illumination brightness control
3-51
3
To Next Page
Loading...
