EasyManua.ls Logo

Subaru Outback 2015 - Installation of Child Restraint Systems Using ISOFIX Anchor Bars

Subaru Outback 2015
610 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (69,1)
Model "A2510GE-B" EDITED: 2015/ 6/ 25
4. To remove the booster seat, press the
release button on the seatbelt buckle and
allow the belt to retract.
WARNING
. Never use a belt that is twisted or
reversed. In an accident, this can
increase the risk or severity of
injury to the child.
. Never place the shoulder belt
under the childs arm or behind
the childs back. If an accident
occurs, this can increase the risk
or severity of injury to the child.
. The seatbelt should fit snugly in
order to provide full restraint.
Loose fitting belts are not as
effective in preventing or redu-
cing injury.
. Place the lap belt as low as
possible on the childships.
High-positioned lap belt will in-
crease the risk of sliding under
the lap belt and of the lap belt
sliding up over the abdomen, and
both can result in serious inter-
nal injury or death.
. Make sure the shoulder belt is
positioned across the center of
childs shoulder. Placing the
shoulder belt over the neck may
result in neck injury during sud-
den braking or in a collision.
& Installation of child restraint
systems using ISOFIX an-
chor bars
Your vehicle is equipped with ISOFIX
anchor bars that allow an appro ved
ISOFIX child restraint system to be in-
stalled on the rear seat without use of a
seatbelt.
Seat, seatbelt and SRS airbags/Child restraint systems
1-39
CONTINUED
1

Table of Contents

Related product manuals