111
RESET both devices and reprogram. Make sure to set Master first.
Remote control can´t be
connected to devices.
• Ensure the remote control is linked to the devices correctly.
• Start with RESET. Make sure to switch on remote control
first, then turn on devices in correct order.
Remote control can´t be
connected to devices.
• Ensure the remote control is linked to the devices correctly.
• Start with RESET. Make sure to switch on remote control
first, then turn on devices in correct order.
Remote control does not
react to finger pressure
• Press different areas lightly.
• Press button ______ for a few seconds.
• Start devices´ RESET. Make sure to switch on remote control
first, the turn on devices in correct order.
Device is off, suddenly starts
on maximum speed for
some time and turns off
again.
Device is set on monitoring mode.
reduces speed and increases
speed during the day.
Device is on AUTO mode and adapts speed to light intensity
(twilight).
To Next Page
Loading...
