Sumitomo 82C+ - Related Products and Consumables

1-4
1. Introduction| Product overview
1．Introduction
To place an order for tools, consumables, and optional accessories, please contact
our sales personnel.
■ Consumables
●
Related products
Part name Part No. Description
<Optional accessories for main unit>
Battery pack BU-16 Li-ion battery for TYPE-82C+
Car battery cable PCV-16
Plugged into a car’s cigarette light jack to supply
power to splicer
AC adapter ADC-16 series AC adapter for TYPE-82C+
Battery charger BC-16 Use only for the battery pack BU-16
Wireless LAN SD card WLSD series Dedicated wireless LAN SD card for the TYPE-82C+
Fiber holders
FHS-025 For 0.25mm coated fiber
FHS-09 For 0.9mm coated fiber
FHS-05 For 0.5mm coated fiber
FHD-1 For drop and indoor cable
Dispenser HR-3 Dispenser for alcohol
<Tools>
Fiber cleaver
FC-8R-FC
Applicable coating diameter: 250 - 900μm
Applicable fiber diameter: 125μm
Replacement blade for FC-6R and FC-8R:
FCP-20BL(7R)
Replacement blade for FC-6:FCP-20BL
FC-8R-F
FC-6S(-C)
FC-6RS(-C)
FC-6S-5C
Jacket remover JR-M03
Jacket remover for single fiber
Fiber protection sleeves, electrodes and battery pack are consumables. To place an
order, please contact our sales personnel.
■ Optional accessories
Part name Part No. Description Quantity
Fiber protection sleeves
FPS-1
For single fiber φ0.25mm~0.9mm
Length 60mm, Cleave length ≤16mm
50 pcs/pack
FPS-40
For single fiber φ0.25mm~0.9mm
Length 40mm, Cleave length ≤10mm
50 pcs/pack
FPS-61-2.6
For single fiber φ0.25mm~0.9mm
Length 61mm, Cleave length ≤16mm
100pcs/pack
Fiber protection sleeve
for cable sheath
FPS-D60
For drop cable, small-sized indoor cable
Length 60mm, Cleave length ≤10mm
25 pcs/pack
Electrodes ER-10 These parts degrade with time and usage
and cannot be recycled. New parts as a re-
placement should be purchased.
1 pair
Battery pack BU-16 1 pc