3-1
3. Maintenance｜Cleaning
3. Maintenance
To keep excellent splice quality, regular cleaning and inspection are
required. Especially cleaning should be performed before and after
each use. We recommend your splicer to be checked through our
maintenance service periodically.
Turn off the TYPE-82C+ before maintenance work. Clean each part with a
cotton swab. Please bear in mind that daily cleaning can maintain splicer
performance. Clean components before and after use.
Failure to do so may cause electric shock.
●
●
Cleaning V-grooves
Even tiny bits of dust or dirt in the
V-grooves might cause the fiber to
be offset. To avoid offset, carefully
clean the V-grooves with a cotton
swab moistened with alcohol.
V-grooves
1: Prepare a cotton swab
moistened with alcohol.
2: Brush the surface of the
V-grooves in the
direction of the arrow.
❚
Cleaning
To Next Page
Loading...
