2-2
2. Basic splicing operation｜Splicer operating procedures
2. Basic splicing operation
❚
Splicer operating procedures
The following is a summary of the steps required to make a splice with the fusion splicer.
For further information on each step, please see the page described below.
1 Turning on the TYPE-82C+ P.2-8
2 Home screen P.2-8
3 Selecting splice program
.2-9
5 P.2-11
6 Cleaving the fiber P.2-12
7 Inserting fibers into the splicer P.2-14
8 Arc test P.2-15
9 Starting the automatic splice P.2-17
10 Splice protection P.2-21
Maintenance P.3-1
Packing and storage instructions P.3-8
4 Selecting heater program P.2-10
To Next Page
Loading...
