Sumitomo 82C+ - Splice Process Screen Setup

6-4
6. Functions｜Operation Settings
6. Functions
Log in to Administrator mode. From the Operation Settings, you can choose a view
of the fibers for the 5 stages of the splicing process.
・Fiber Insertion Screen
・Pre-Fusion Screen
・Arc Screen
・Post-Fusion Screen
・Est. Loss Screen
■ Splicing process screen setup（Available in Administrator mode）
If “X or Y only” is selected, X
or Y screen is displayed on
the screen.
If “X above Y” is selected,
X and Y screens are
vertically displayed on the
screen.
If “X beside Y” is selected, X
and Y screens are
horizontally displayed on
the screen.
X or Y only
X above Y
X beside Y