6-8
6. Functions｜Splice Data
6. Functions
2: Select a data point from the
splice dates/times.
<Splice data details summary>
■ View splice data
3: You can view the details of
the splice data point you
selected.
1: From the Splice Data screen
(see the previous page) select
“Stored Splice Data” and
select a data storage location.
In Administrator mode, the details
of splice program setup items can
be viewed.
For more information, please refer
to P.4-6 and P.4-7.
・Fiber Offset Inspected offset of the core axis
(or diameter axis).
・Core Offset Inspected core step status of the
offset caused by deformation
・Core Angle Inspected tilt angle of the core
axis caused by deformation.
・Concentricity Inspected core eccentricity of the
(L/R) fiber.
・Cleave Angle Inspected cleave angle of the
(L/R) fiber.
・Image Captured fiber image
・Memo A short note can be entered.
Search for splice data
Tap the magnifying glass icon ( ) to search
for a splice data point. You will be moved to
the search screen where you can search
within a range of splice dates.
To Next Page
Loading...
