INSTALLATION, OPERATION, AND MAINTENANCE MANUAL
SUMMIT PUMP MODEL CCFM GENERAL PURPOSE 15
8 MAINTENANCE TIMETABLE
8.1 DAILY MAINTENANCE
1. Check the lip seals (49, 51), casing gasket (73A) and the mechanical seal (60-80B) in the pump for
damage or leakage.
2. Verify expected flow, head and power consumption are achieved.
3. Check noise levels, fluid and bearing frame (19) temperatures.
8.2 SIX MONTH MAINTENANCE
1. Daily maintenance and the following.
2. Lubricate lip seals (49, 51) and bearings (16, 18) based upon lubrication schedule for service
intensity.
3. Inspect and/or clean suction and discharge spools for debris and wear.
8.3 YEARLY MAINTENANCE
1. All the above and the following:
2. Check and compare pump performance with published performance curve and previous data
recordings of the pump. These inspections can range from once a year, to once every three to
five years.
To Next Page
Loading...
