iv Sun Fire V210 and V240 Servers Administration Guide • December 2005
1.2.10 Keyswitch 1–15
1.3 Back Panel Features 1–17
1.3.1 I/O Ports 1–17
1.3.2 Network Status Indicators 1–18
1.3.3 USB Ports 1–19
1.3.4 External SCSI Port 1–19
1.3.5 Power Supply Unit 1–19
1.4 System Prompts 1–20
2. Removing and Replacing Components 2–1
2.1 Replaceable Components 2–2
2.2 Avoiding Electrostatic Discharge 2–2
2.2.1 Avoiding Electrostatic Discharge While Working on the Front
Panel 2–2
2.2.2 Opening the Front Bezel 2–2
2.3 Controlling Server Power 2–4
2.3.1 Powering On—Using the On/Standby Switch 2–4
2.3.2 Powering Off—Using the On/Standby Switch 2–5
2.4 Swapping a System Configuration Card Between Servers 2–6
2.4.1 Swapping a System Configuration Card Between Servers 2–6
2.5 Removing and Replacing Hard Drives 2–7
2.5.1 Removing a Hard Drive 2–7
2.5.2 Replacing a Hard Drive 2–8
2.5.3 Installing a SCSI Hard Drive With Solaris Running 2–9
2.5.4 Removing a SCSI Hard Drive With Solaris Running 2–11
2.6 Removing and Replacing the DVD Drive 2–12
2.6.1 Removing the DVD Drive 2–13
2.6.2 Replacing the DVD Drive 2–13
2.7 Removing and Replacing a Power Supply Unit 2–14
To Next Page
Loading...
Need help?
General
