- 02 -
Do NOT extend the power cable during the bench test because DC power
drops quickly along the transmission. A bench test helps you rule out all
problems caused by power supply. Underpower causes problems such as
1. Ghost image
2. Unstable infrared (camera reboots repeatedly) and
3. Random spinning dome.
Type B: With PoE+ Injector/Switch
Test the camera on your desk before mounting outside.
IP Camera
Router
Computer
PoE+ Injector
When powered up, the speed dome automatically begins a self-diagnostic
process during which the camera will pan horizontally and vertically to
make sure PTZ, lens and other parts of the camera are functional. Please
contact our technical staff if a self-test does not happen on your unit. Please
refrain from disassembling the unit before contacting us. Thanks for
your cooperation.
Built-in self-test
Questions? Ask support@sunba.net
Connection Good
Power Good
Video and Control Good
Tested Day and Night
Guess we are ready to mount it outside.
To Next Page
Loading...
