- 04 -
The screws and anchors to attach the camera to the installation
environment are not included and please set the appropriate screws
subject to the specific environment such as concrete, wood, dry wall and
bricks.
2.4 Mounting Outdoor
100V~250V
Data in
Router
Non-PoE
ELE (Force Electricity)
Wiring method:
≥18 wire gauge
DC 12V
Power Adapter
Good, the camera is working correctly. Now I just need to pick the right
extension cable and mount it outside!
≥30W
100V~250V
Data out
Data in
Router
POE+out
POE+
802.3at
100~200ft
POE+
ELV (Extra-LowVoltageSystem)
Wiring method:
Injector/Swith
Please use Sunba 65W high
power injector if you are runing
over 200ft.
Consider using extension cord to get AC the required distance first, then
use the power adapter. If that’s not possible in your environment, pick a
thicker wire (≥18 AWG) for DC extension or consider running PoE+.
To Next Page
Loading...
