Preparing coffee
Preparing espresso with beans
To prepare espresso with whole coffee beans,
proceed as follows:
Place one or two cups under the coffee
dispensing spout.
In order to reduce heat loss and splashing,
adjust the dispensing spout height to suit
your cup size by moving it up or down.
See Figure 11.
Note: If the height adjuster is difficult to
move, clean it following instructions on
page 31, Cleaning the height adjustable
dispenser unit.
Select the desired cup size by pressing the
(C) button. The following selections are
possible:
Coffee mug
INP
Coffee cup
Espresso cup
approx. 190
ml
approx. 120
ml
approx. 40
ml
The set cup filling level remains stored even
when the coffee machine is switched off.
The coffee machine is set for standard
quantities for each cup size by default. If
you wish to change any of the cup filling
quantities, instructions can be found on page
21, Espresso pour volume.
Select the desired ground coffee quantity
by pressing the (A) button. The following
selections are possible:
0 0 0 dt. dt.
0 0 dt. dt. dt.
0 dt. dt. dt. dt.
dt. dt. dt. dt. dt.
"extra "light" "normal" "strong" "extra
light" strong"
The most recent ground coffee quantity
remains set for each cup size.
The set ground coffee quantity remains
stored even when the coffee machine is
switched off.
15
To Next Page
Loading...
