Cleaning and maintenance continued
The brewing unit is positioned. The following
then appears on the display:
fr- 11 fr-
41- -
NI
+
Remove the drip tray and empty it.
Push the drip tray into the coffee machine
as far as indicated on the display.
The drip tray serves the purpose of a
collecting the cleaning water.
Note: Push the drip tray into the coffee
machine to the first stop. If the position of
the drip tray is not correct, the following
appears on the display:
I
Change the position until the display
disappears.
Press the s button to continue with the
cleaning process.
The program performs several cycles. The
following appears alternately on the display
during the cleaning process:
444
4111--'
I I
The brewing unit is positioned. The following
then appears on the display:
fr- 11 fr-
41- -
NI
+
Remove the drip tray and empty it.
Push the drip tray into the coffee machine
as far as indicated on the display.
Press thesbutton to continue with the
cleaning process.
The machine starts rinsing and the following
appears on the display:
44-I III iii
6 6 &
6
At the end of the cleaning process, the
following appears on the display:
fr- 11 II-
41- -
NI
+
Remove the drip tray and empty it.
Push the drip tray into the coffee machine
as indicated on the display.
Press the ()button to complete the
cleaning process. The following appears on
the display:
(MT)
6 6 6
The cleaning process is completed. The
coffee machine is now ready for operation
again and returns to the last selected coffee
mode.
Note: We recommend disposing the first cup
of dispensed coffee after cleaning.
37
To Next Page
Loading...
