Sunfar E300-2S0022(B) - Page 25

18 SUNFAR E300 SERIES
F1.17
Overload warning
delay time
0.0 ~ 20.0 S 0.1 2.0 ×
F2.0 Startup freq 0.0 ~ 50.0 Hz 0.1 1.0
F2.1
Startup freq lasting
time
0.0 ~ 20.0 S 0.1 0.0 ×
F2.2 Stop mode 0: Dec stop 1: Free stop 1 0
F2.3
DC braking initial
freq when stop
0.0 ~ 500.0 Hz 0.1 3.0
F2.4
DC braking action
time when stop
0.0 ~ 20.0 S 0.1 0.0 ×
F2.5
DC braking action
volt when stop
0 ~ 50 (%) 1 10
F2.6 FWD jog freq 0.0 Hz~ upper freq 0.1 10.0
F2.7 REV jog freq 0.0 Hz ~ upper freq 0.1 10.0
F2.8 Acc moment level 110 ~ 200 (%) 1 170
F2.9
Motor overload
protection coefficient
50 ~ 110 (%) 1 100
Auxiliary running parameter unit
F2.10
Initial volt of dynamic
braking (E300B
series)
300 ~400V
600 ~ 800V
1
370
740
F3.0 Multi-speed freq 1 0.0 Hz ~ upper freq 0.1 35.0
F3.1 Multi-speed freq 2 0.0 Hz ~ upper freq 0.1 15.0
F3. 2 Multi-speed freq 3 0.0 Hz ~ upper freq 0.1 3.0
F3. 3 Multi-speed freq 4 0.0 Hz ~ upper freq 0.1 20.0
F3. 4 Multi-speed freq 5 0.0 Hz ~ upper freq 0.1 25.0
F3. 5 Multi-speed freq 6 0.0 Hz ~ upper freq 0.1 30.0
F3. 6 Multi-speed freq 7 0.0 Hz ~ upper freq 0.1 35.0
F3. 7
Linear speed
coefficient setting
0.01 ~ 10.00 0.01 1.00
F3. 8
Monitor parameter
selection
0 ~ 21 1 0
F3. 9
Parameter check
and modification
authorit
y
0 ~ 9999 1 1700
Multi-speed and senior running parameter unit
F3. 10
Parameter
initialization
0: No action
1: Standard initialization
2: Eliminate failure record
3: Complete initialization
1 0
×
E300 Series Mini-type Integrated Universal Inverter Manual