CHAPTER
TWO
COMPONENT LIST AND ASSEMBLY INSTRUCTIONS
Before assembling the PiCar-X, please first verify that all parts and components have been included. If there are any
missing or damaged components, please contact SunFounder immediately at cs@sunfounder.com to resolve the issue
as soon as possible.
Please follow the steps on the following PDF for assembly instructions:
[PDF]Component List and Assembly of PiCar-X.
Note: If the servos has been powered on through the Robot HAT after assembly, do not manually force the steering
gear, as this could cause damage to the servo.
Note:
1. Before assembling, you need to buy 2 18650 batteries and fully charge them, refer to About the Battery.
2. Robot HAT cannot charge the battery, so you need to buy a battery charger at the same time.
9
To Next Page
Loading...