SunFounder picar-x
• When the two power indicators on the Robot HAT are off, it means the power is too low and the batteries need
to be charged.
Button Top vs Flat Top?
Please choose battery with button top to ensure a good connection between the battery and the battery holder.
Button Top Flat Top
No protective board?
You are recommend to use 18650 batteries without a protective board. Otherwise, the robot may be cut power and
stop running because of the overcurrent protection of the protective board.
Battery capacity?
In order to keep the robot working for a long time, use large-capacity batteries as much as possible. It is recommended
to purchase batteries with a capacity of 3000mAh and above.
6.3. About the Battery 141
To Next Page
Loading...
