Sungrow Logger 3000 User Manual

7
3.1.2 Function Introduction
The functions of the Logger3000 can be concluded as,
Device Connection
The Logger3000 can connect to the inverter, transformer, EM device and meter
in the PV system through the RS485 method.
Device management
The Logger3000 can manage the devices connected and configure the
parameters of the inverter connected, and upgrade the firmware for on-site
maintenance.
System maintenance
The Logger3000 can maintain the system time, network, serial port, and
protocol point through embedded WEB browser.
Data gateway
The Logger3000 can transmit data to Sungrow’s background and the
third-party’s background. It can also transfer the background instruction to
downstream devices. The Logger3000 supports protocol of Modbus-TCP and
IEC60870-5-104 (i.e. IEC104).
The Logger3000 cannot replace the meter as the measuring device. if
the energy info on the Logger3000 is different from that on the meter,
please refer to the measurement on the meter.
3.2 Appearance
Front view Side view
Bottom view
A
B
C

Sungrow Logger 3000 Specifications

General

Brand	Sungrow
Model	Logger 3000
Category	Data Loggers
Language	English