Sungrow Logger 3000 User Manual

7 Commissioning User Manual
21
Step
Content
Result
7
Set the ETH2 network parameter and the network forwarding
protocol parameter by referring to 8.9.6 Service Settings.
□
The automatic search function is valid only for string inverters that
support the search and device automatic allocation. For other devices
like the meter, transformer and etc., please connect to the Logger3000
through device operation. Note that the addresses of the devices under
the same communication port cannot repeat. Please save the operations
after operation. The settings are invalid if otherwise.

Sungrow Logger 3000 Specifications

General

Brand	Sungrow
Model	Logger 3000
Category	Data Loggers
Language	English