5
10
each end of the Aluminum Housing Assembly, and
See Figure 10
11
each end of the Aluminum Housing Assembly, through
See Figure 11
12
Mark a Horizontal
Line on the wall below each end of the EasyShade
Figure 12
Figure 12
13
Figure 13
Step 12
Cable Guide Brackets must be mounted on the same
Figure 13
Cable Guide
Vinyl Coated Cable
14
15
as shown in Figure 14
Remove the Bracket and pre-drill both screw hole
Figure 14
Cable Guide Bracket
16
Figure 10
Vinyl Coated
Guide Cable
Figure 11
EasyShade
Solar Screen
Vinyl Coated Cable
Guide Hole
CAUTION: The installaon procedure for the
Motorized EasyShade includes the use of Cable
Guides to stabilize the extended Solar Screen Fabric
Panel during normal use. If your applicaon does
not permit the installaon of the necessary Cable
Guides or you do not plan to install them, you must
use addional care to prevent damage to your
product. While we do not recommend installing the
Motorized EasyShade without the supplied Cable
Guides, some customers may determine that their
applicaon does not have a vercal surface to install
the supplied Cable Guides as instructed.
To Next Page
Loading...
Need help?
General
