High Voltage Series | Installer Manual46
USB's Upgrade Step
1. USB type: USB2.0, FAT32;
2. Create the upgrade folder according to the directory;
3. Place the upgrade le provided by the supplier in the upgrade folder;
4. Turn on the battery, and insert the USB ash disk after the blue indicator is on;
5. After the blue light indicator ashes and turns o, pull out the USB ash disk to complete the upgrade.
Do not turn o the battery during the process.
6. After the blue light indicator of the battery lights up again, check the version number through the screen
or app and verify the upgrade result.
BATTERY MODULE STORAGE
1. To ensure the battery service life, the storage temperature shall be kept between 0°C~35°C. The battery
shall be cycled at least once every 6 months.
2. To minimize self-discharge in a long storage period, disconnect the BATTERY connection (1/2) of the
high-voltage control box of the DC connecting cable. This will interrupt the use of the 12 V power supply
installed in the high-voltage control box and prevent the battery from self-discharging.
To Next Page
Loading...
Need help?
General