Supa L16 - Programming User Partition

Programming User Partition
1) Press [ Master Code ] + [ 7 ]
☼ The Line light blinks to indicate Programming mode.
2) Enter 4-digit address location [ ] [ ] [ ] [ ]
☼ The default partition will be displayed by the keypad
4-Digit Address Location User Type Default Partition
0451 Master User / User-1 1
0453 User-3 1
0454 User-4 1
0455 User-5 1
0456 User-6 1
0457 User-7 1
0458 User-8 1
0459 User-9 1
0460 User-10
1
0461 User-11
1
0462 User-12
1
0463 User-13
1
0464 User-14
1
0465 User-15
1
0466 User-16
1
0467 User-17
1
0468 User-18
1
0469 User-19
1
0470 User-20
1
3) Enter a new partition for user selected
♪ 3 beeps to indicate a new partition is set.
☼ You may continue to enter a new address location to program another user partition.
☼ 1-partition1, 2-partition2, 3-partition3, 4-partition4
4) Press [  ] to exit Programming mode
☼ The Line light will turn off to indicate exit from Programming mode
L8_UM1016-v1.0
13
www.ealarm.com.my