Supa L16 - Programming Telephone Numbers; Deleting Telephone Numbers

Programming Telephone Numbers
1) Press [ Master Code ] + [ 7 ]
☼ The Line light blinks to indicate Programming mode.
2) Enter 4-digit address location [ ] [ ] [ ] [ ]
☼ The existing telephone number will be displayed by the keypad
4-Digit Address Location Telephone Number Maximum Digits
0611 1
st
16
0612 2
nd
16
0613 3
rd
16
0614 4
th
16
3) Enter a new telephone number [ ] [ ] [ ] … [ ]
4) Press [  ] to store new telephone number
♪ 3 beeps to indicate a new telephone number is entered.
☼ You may continue to enter a new address location to program another telephone number.
5) Press [  ] to exit Programming mode
☼ The Line light will turn off to indicate exit from Programming mode
Deleting Telephone Numbers
1) Press [ Master Code ] + [ 7 ]
☼ The Line light blinks to indicate Programming mode.
2) Enter 4-digit address location [ ] [ ] [ ] [ ]
3) Press [ # ] [ # ]
♪ 3 beeps to indicate the telephone number is deleted.
4) Press [  ] to exit Programming mode
☼ The Line light will turn off to indicate exit from Programming mode
Information
● It is recommended that all telephone locations to be programmed.
L8_UM1016-v1.0
14
www.ealarm.com.my