Superchips TrailDash - Vehicle Programming; Custom Engine Options

11
*Crawl = Designed for o-road
conditions. Pedal response will be
less sensitive. 87 or higher octane is
recommended.
3. After choosing a power level,
you will be prompted with the op-
tion to “Create a custom program.”
Choosing YES will load the Cus-
tom Options menu. The custom
options available will depend on
your specic vehicle model. (See
Custom Options section below for
more information)
4. If you are creating a Custom Pro-
gram, follow the on screen instruc-
tions and make your adjustments.
5. During programming, the device
will go through a series of screens
telling you the action it is complet-
ing. Follow the on screen instruc-
tions. After the TrailDash device
has successfully programmed your
vehicle, the level number will ap-
pear on the Main Gauge Screen in
the level indicator box.
CUSTOM OPTIONS - ENGINE
Various custom options are avail-
able based on your vehicle year and
model. The following information
explains what you are changing
and how. Please use caution when
using these options.
Speed Limiter
This feature allows the user to
increase the vehicle speed limiter
that is set from the factory. Typi-
cally this is set to a stock setting of
~100 Mph.
NOTE: If your device has the ability
to remove/adjust your vehicle’s
factory speed limiter. It is your
responsibility to ensure your tires
and other vehicle components are
rated accordingly.
WARNING: If you drive on
public roads after removal or ad-
justment of the speed limiter, you
must still obey all driving laws.
Rev Limiter
This feature allows you to increase
the engine RPM limiter that is in-
stalled from the factory. The value
can be increased from 5700 RPM
to 6300 RPM depending on the
vehicle.
Pedal Response
Allows you to change the accelera-
tor pedal sensitivity. This is espe-
cially useful in standard transmis-
sion vehicles while o-roading.
Three Selections are available for
this option…
1. Superchips – Aggressive
2. User – A hybrid between the
stock and superchips setting.
3. Stock – Standard Pedal Response
in a Wrangler vehicle.
MDS Disable
This feature allows you to disable
the Mult-Displacement System
inside a V8 engine. By turning MDS
OFF, the vehicle’s engine will run
on all eight cylinders at all times.
Typically MDS will shut 4 of these
cylinders o in an eort to reduce
fuel consumption. However this
can result in reduced power deliv-
ered to the wheels.
PROGRAMMING CONT’D