Superchips TrailDash - Fusion Software Updates; Update Required Process; Handling Non-Stock Conditions

27
6. Click OK and the update will be
completed. You’ll now have the
latest Firmware, and Calibration on
your device.
When your device is connected
to Fusion, the device model, Lvl,
Bootloader, Firmware, Calibration
and Serial Number are all displayed
at the bottom of the screen. These
numbers will be useful to quickly
view the state of your device, and
whether or not it is currently pro-
grammed to a vehicle.
MODEL: The model number for your
device.
LVL: The currently programmed
level.
BOOTLOADER: The boot loader ver-
sion currently on your device.
FIRMWARE: The rmware version
currently on your device.
CALIBRATION: The calibration ver-
sion currently on your device
SERIAL NUMBER: The serial number
assigned to your device
UPDATE REQUIRED
Fusion is designed to help the
development team at Superchips
suppor t new vehicle calibrations.
When you connect your device to
the vehicle, the rst step it takes is
identifying your vehicle’s stock le.
If the stock le isn’t currently sup-
ported:
1. The device will display a screen
alerting you that the stock le is not
yet supported.
2. It will then prompt you to touch
the screen in order to read and save
the stock le.
3. Once the device has saved the
stock calibration, it will prompt you
to connect the device to Fusion.
4. Fusion will ask you if you want
to upload your vehicle’s stock les
to our server. Choosing Yes will
upload the les to the server, and
alert the development team. This
will help the development team at
Superchips provide support for your
vehicle’s calibration as quickly as
possible.
NON-STOCK CONDITION
During programming, the device
will read the stock le on your
vehicle and compare it to a cor-
responding stock le that has been
veried by Superchips.
If there is a mismatch, the device will
alert you, and display this message:
“Non-stock condition detected.
This is most likely because your
vehicle has been programmed
with a competitive product. It is
recommended that you return your
vehicle to a stock condition with
the product that changed it. Alter-
natively, you can plug your device
into your computer and it will load
the necessary les onto your device
to return your vehicle to stock.”
FUSION CONT’D