20
UNITS
Changing the unit option allows
you to view PIDs in either Metric or
English on the main gauge screen.
Vehicle Speed, for example, may be
viewed as either MPH or KPH. Tem-
perature PIDs such as Engine Cool-
ant Temperature may be viewed as
either Fahrenheit or Celsius.
NOTE: All PIDs will use only one or
the other unit of measure. Exam-
ple: If you choose Metric, all PIDs
related to Temperature or Distance
will be displayed in Metric.
CAUTION: If you set up your units
in either English or Metric, the
alert value will be the same for
both. If you change from one unit
to another, you will need to setup
the alert values accordingly. For
example, 100 MPH is not the same
as 100 KPH.
FACTORY RESET
If you would like to revert back to
the factory default settings, simply
select Factory Reset
and choose YES or press
ENTER.
Many settings will be returned
back to the default setting as they
were when the unit was new. Any
changes you’ve made to the alerts,
the gauge screen displays, etc will
be returned to the default settings.
NOTE: Factory Reset will not return
the vehicle to stock from a pro-
grammed Power Level. See Pro-
gramming section for instructions
to return to stock power level.
TPMS CONTROL-UNLOCK
This features allows you to access
your vehicle’s TPMS (Tire Pressure
Monitoring System). Once it is un-
locked, you will be given the ability
to modify it’s parameters.
In order to use this feature:
1. Locate the serial # on the bottom
of your device.
2. Go to:
tpmsoptions.superchips.com
3. Fill out the required information
and Submit. An email will be sent
providing a link allowing you access
to your unlock code.
4. Write this code down for future
reference. Use the code to unlock
the TPMS on your device.
OPTIONS CONT’D
To Next Page
Loading...
