1-2
SUPERSERVER 5018D-FN4T User's Manual
1-2 Motherboard Features
The SuperServer 5018D-FN4T is built around the X10SDV-TLN4F, a single
processor motherboard designed to provide maximum performance. Below are the
main features. (see Figure 1-1 for a block diagram)
Processors
The motherboard supports a single Intel Xeon D SoC D-1540 eight Core 45W
embedded processor. (SoC = System on a Chip)
Memory
The motherboard has four DDR4 288-pin slots that can support up to 128 GB of
RDIMM or 64GB UDIMM memory. It supports 2133 MHz memory modules.
Serial ATA
The motherboard supports up to six SATA3 (6Gbps) hard drives or SSDs. (The
5018D-FN4T server supports four.)
Input/Output Ports
The system features two GbE and two 10G Base T LAN ports, a dedicated IPMI LAN
port, two USB 3.0 ports, a serial connector, and one VGA port. (The motherboard
includes four USB 2.0 headers.)
To Next Page
Loading...
Need help?
General
