7-30
SUPERSERVER 5018D-FN4T User’s Manual
7-6 Security Settings
This menu allows the user to congure the following security settings for the
system.
Password Check
Select Setup for the system to check for a password at Setup. Select Always for the
system to check for a password at bootup or upon entering the BIOS Setup utility.
The options are Setup and Always.
Administrator Password
Press Enter to create a new, or change an existing Administrator password.
CSM Support
Select Enabled to support the EFI Compatibility Support Module (CSM), which
provides compatibility support for traditional legacy BIOS for system boot. The
options are Enabled and Disabled. The options are Enabled and Disabled.
Secure Boot Menu
This section displays the contents of the following secure boot features:
• System Mode
• Secure Boot
• Vendor Keys