Supermicro SuperServer 1019C-HTN2 - Page 41

41
SuperServer 1019C-HTN2 User's Manual
ME Manufacturing Mode

 

Manufacturing Mode
Jumper Settings
Jumper Setting Denition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacturing Mode
VGA Enable/Disable

VGA Enable/Disable
Jumper Settings
Jumper Setting Denition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
PCI-E Bifurcation
Use JRF1 to set the function of CPU slot 6 as either a x16 or bifurcate to x8x8 lanes. Refer

PCI-E Bifurcation
Jumper Settings
Jumper Setting Denition
Pins 1-2 x16 lane (Default)
Pins 2-3 x8x8 lane
LAN Port Enable/Disable
Use JPL1 to enable or disable LAN1, and JPL2 to enable or disable LAN2. The default setting
is Enabled.
LAN Port Enable/Disable
Jumper Settings
Jumper Setting Denition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled