SuperServer1019C-HTN2 User's Manual
92
6.6 Security
Administrator Password
Use this feature to set the administrator password which is required to enter the BIOS setup
utility. The length of the password should be from 3 characters to 20 characters long.
Password Check
Select Setup for the system to check for a password at Setup. Select Always for the system
to check for a password at bootup or upon entering the BIOS Setup utility. The options are
Setup and Always.
Secure Boot
System Mode
Secure Boot
Attempt Secure Boot
Select Enable for secure boot support to ensure system security at bootup. The options
are Disabled and Enabled.
To Next Page
Loading...
Need help?
General
