EasyManua.ls Logo

Supermicro SuperServer 1019C-HTN2 - Page 77

Supermicro SuperServer 1019C-HTN2
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 6: BIOS
77
PCH-FWConguration
ME Firmware Version: 12.0.3.1091
ME Firmware Mode: Normal Mode
ME Firmware SKU: Corporate SKU
ME FW Image Re-Flash
Disabled and
Enabled.
Manageability Features State
            
Enabled.
AMT BIOS Features
Disable this feature to deny access to the MEBx setup. The options are Disabled and Enabled.
*If the feature "AMT BIOS Features" is set to Enabled, the AMT Conguration submenu
will be available for conguration:
AMTConguration
ASF support
Use this feature to enable or disable Alert Standard Format support. This feature sends an
alert about a potential issue when the operating system is in a sleep state. The options are
Disabled and Enabled.
USB Provisioning of AMT
Use this feature to enable or disable USB provisioning. The options are Disabled and Enabled.
CIRCAConguration
Activate Remote Assistance Process
Use this feature to activate Remote Assistance. Enabling this feature will also trigger the
CIRCA boot. The options are Disabled and Enabled.
*If the feature "Activate Remote Assistance Process" above is set to Enabled, the
feature below will be available for conguration:
CIRCA Timeout
Use this feature to set the timeout value for MPS connection. Use 0 for the default timeout
value of 60 seconds.

Related product manuals