Supermicro SuperServer E403-9P-FN2T - Page 87

Chapter 5: UEFI BIOS
87
Master Atribute for DMA transactions. Some devices request Bus Master to be enabled for
operations. The options are Disabled and Enabled.
Onboard LAN Device
Use this feature to enable or disable Onboard LAN devices. The options are Disabled and
Enabled.
Onboard LAN1 Option ROM

boot. The options are Disabled, Legacy, and EFI.
Onboard LAN2 Option ROM

boot. The options are Disabled, Legacy, and EFI.
Onboard Video Option ROM
Use this feature to select the Onboard Video Option ROM type. The options are Disabled,
Legacy, and EFI.
Network Stack Conguration
Network Stack

Firmware Interface) for network stack support. The options are Enabled and Disabled.
IPv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. The options are Disabled and Enabled.
IPv4 HTTP Support
Select Enabled to enable IPv4 HTTP boot support. The options are Disabled and Enabled.
IPv6 PXE Support
Select Enabled to enable IPv6 PXE boot support. The options are Disabled and Enabled.
IPv6 HTTP Support
Select Enabled to enable IPv6 HTTP boot support. The options are Disabled and Enabled.
PXE Boot Wait Time
Use this option to specify the wait time to press the ESC key to abort the PXE boot. Press
"+" or "-" on your keyboard to change the value. The default setting is 0.
Media Detect Count
Use this option to specify the number of times media will be checked. Press "+" or "-" on
your keyboard to change the value. The default setting is 1.