Supermicro SuperServer SYS-221BT-DNTR - DIMM Installation; DIMM Removal

48
Chapter 3: Maintenance and Component Installation
DIMM Installation
1. Insert the desired number of DIMMs into the memory slots based on
the recommended DIMM population tables in the previous section.
Locate DIMM memory slots on the motherboard as shown on the
right.
2. Push the release tabs outwards on both ends of the DIMM slot to
unlock it.
Release Tab
Notch
Push both ends straight down
into the memory slot.
1
D1
S1
S2
D2
BAR CODE
BIOS
LICENSE
IPMI CODE
SLOT1
JCOM1
NS1
NS2
NS3
J38
JUIDB1
JUSB1
JVGA1
JRK1
LEDBMC
LE6
JCPLD1
FAN3
SATA2
BT1
JPFR3
JPFR2
JPFR1
JP6
JWD1
JVRM1
JPME2
JBR1
JP1
JPME1
SATA1
SXB1
SLOT2
JBT1
JAIOM
JPWR4
JPWR3
JPWR1
SLOT2A
SXB5
UID_LED1
SXB6
JNCSI1
NC_SI1
SXB4
SXB3
JPWR2
JTPM1
JDB1
NS4
NS5 NS6
SATA 8 ~11
USB2/3
(3.0)
SATA 0~7
COM1
P2-DIMME1 P2-DIMMG1 P2-DIMMF1 P2-DIMMH1
P2-DIMMB1 P2-DIMMC1 P2-DIMMD1 P2-DIMMA1
P1 NS1 PCIe 5.0 x8
P1 SXB4 PCIe 5.0 X8
P1 SXB3 PCIe 5.0 X8
CPU1 SLOT1 PCIe 5.0 X16
P2 SXB1 PCIe 5.0 X16
BATTERY
UID
USB0/1
(3.0)
VGA
M.2 SATA0~1
P2 SLOT2 PCIe 5.0 X16
P1 AIOM PCIe 5.0 X16
P1-DIMMF1 P1-DIMME1 P1-DIMMH1 P1-DIMMG1
P1-DIMMB1 P1-DIMMA1 P1-DIMMC1 P1-DIMMD1
P1 SXB5 PCIe 5.0 X8
TPM/PORT80
CPU1
X13DET-B
REV:1.01
CPU2
BIOS
IPMI_LAN
PCH
BMC
VROC RAID
LE1
P2NS2 PCIe 5.0 x8
P2NS3 PCIe 5.0 x8
HDD_LED1
3. Align the key of the memory module with the
receptive point on the memory slot.
4. Align the notches on both ends of the module
against the receptive points on the ends of the slot.
Rlease Tabs
Receptive Point
Key
5. Push both ends of the module straight down into
the slot until the module snaps into place.
6. Press the release tabs to the lock positions to
secure the memory module into the slot.
DIMM Removal
Press both release tabs on the ends of the memory
module to unlock it. Once the memory module has been
loosened, remove it from the memory slot.
Warning! Please do not use excessive force when pressing the release tabs on the ends of
the DIMM socket to avoid causing any damage to the memory module or the DIMM socket.
Please handle memory modules with care. Carefully follow all the instructions given on page 1
of this chapter to avoid ESD-related damages done to your memory modules or components.