66
Chapter 3: Maintenance and Component Installation
3.12 Backplane
The backplane (BPN-NVME5-217BHQ-S6) supports 12 SAS/SATA/NVMe drives. Four
connectors are located on the back side of the backplane, two connected to each node. A
cable linking the NearStack HD connector on the adapter to a high speed connector (P1 NS1,
P1 NS2, or P1 NS3) on the motherboard's PCB provides PCIe 5.0 support. For 12 SAS/SATA
drive support, additional SAS adapters and cables are required
Figure 3-14. SATA/NVMe Backplane (Side Facing Chassis Rear)
3.13 Storage Adapter
The storage adapter (SCC-P12N12SGH-B2) connects directly to the backplane and provides
a SlimSAS x8 connector. It is connected to the motherboard on SXB1 and SXB3 and powered
by four 6-pin power connectors (JPWR1 to 4). All models of the SYS-221BT-D Series include
the SCC-P12N12SGH-B2.
Figure 3-18. Storage Adapter (SCC-P12N12SGH-B2)
To Next Page
Loading...
