Supermicro SuperServer SYS-221BT-DNTR - Chapter 1 Introduction; 1.1 Overview

9
Chapter 1: Introduction
Chapter 1
Introduction
1.1 Overview
This chapter provides a brief outline of the functions and features of the SuperServer
SYS-221BT-D Series. It is a two node system with energy-e󰀩cient power supplies and
balanced I/O bandwidth. The SuperServer SYS-221BT-D Series is based on the X13DET-B
motherboard and the CSE-217BD2-R2K22P chassis. An overview of the system is listed
below.
System Overview
Motherboard
X13DET-B
Chassis
CSE-217BD2-R2K22P
Processor Support
Supports dual Intel Xeon Scalable Family 4th Gen Series Processors (Socket E E1A LGA4677,
Socket E E1B LGA4677, or Socket E E1C LGA4677) with a thermal design power (TDP) of up to
350W and four UPIs (UltraPath Interconnect) of up to 16 GT/s per node.
Chipset
Intel C741
Memory
Supports up to 4TB RDIMM DDR5 (288-pin) ECC memory with speeds up to 4800MT/s in 16
DIMM slots
Drive Support
Front hot-swappable drives include:
SYS-221BT-DNTR: Two LFF Gen5 NVME/SATA and 10 LFF Gen4 NVME/SATA
SYS-221BT-DNC8R: Two LFF Gen5 NVME/SAS and 10 LFF Gen4 NVME/SAS
Internal M.2 drives per node includes one of the following:
Default carrier for two M.2 NVMe Gen 4 SSDs in the 22110 form factor
Optional carrier for two M.2 NVMe Gen 3 SSDs in the 2280 form factor
Internal Connector:
VROC key header
Expansion Slots
SYS-221BT-DNTR: One PCIe Gen5 LP x16 and two PCIe Gen5 LP x8
SYS-221BT-DNC8R: One PCIe Gen5 LP x16 and one PCIe Gen5 LP x8
Networking
One AIOM or any compliant OCP 3.0 SFF Network Interface Card per node
One dedicated BMC LAN port per node
I/O Ports
Two USB 3.1 ports per node
One VGA port per node
System Cooling
Four 8-cm mid-chassis fans
Two CPU heatsinks per node
One air shroud per node
Power
Redundant 2200W modules, 80Plus level Titanium
Form Factor
2U rackmount; (WxHxD) 17.6 x 3.5 x 28.8 in. (449 x 88 x 730 mm)
Notes: A Quick Reference Guide can be found on the product page of the Supermicro website.
The following safety models associated with the SYS-221BT-D Series have been certied as
compliant with CSA or UL models: 217B-22, 217B-30, 217B-R22X13, 217B-R30X13.