Supermicro X11SPi-TF

Super X11SPi-TF User's Manual
82
tRWSR Relaxation
Select Enable to use the same TRWSR DDR timing setting among all memory channels,
in which case, the worst value among all channels will be used. Select Disable to use
di󰀨erent values for the TRWSR DDR timing settings for di󰀨erent channels as trained.
The options are Disable and Enable.
2x Refresh
Select Enable for memory 2X refresh support to enhance memory performance. The
options are Enable and Auto.
Page Policy
Use this feature to set the page policy for onboard memory support. The options are
Closed, Adaptive, and Auto.
IMC Interleaving
Use this feature to congure interleaving settings for the IMC (Integrated Memory Control-
ler), which will improve memory performance. The options are 1-way Interleave, 2-way
Interleave, and Auto.
Memory Topology
This item displays the information of onboard memory modules as detected by the
BIOS.
Memory RAS Conguration
Static Virtual Lockstep Mode
Select Enable to run the system's memory channels in lockstep mode to minimize
memory access latency. The options are Disable and Enable.
Mirror Mode
This feature allows memory to be mirrored between two channels, providing 100%
redundancy. The options are Disable, Mirror Mode 1LM, and Mirror Mode 2LM.
Memory Rank Sparing
Select Enable to enable memory-sparing support for memory ranks to improve memory
performance. The options are Disable and Enable.